S-TYPE - ALUMINIUM SET
 
For Stratocaster® type guitars
 
These Aluminium single coil pickups have been designed from the ground up. Every step of its design ensures the greatest tone whilst offering  minimal electrical noise.
 
The chassis / bobbin is made using 100% aluminium, This forms the basis of the noise free design.
 
Each pickup comes with two mounting screws and springs for height adjustment.
 
The coils on these pickups are 100% hand scatter wound with 42 gauge copper wire for ultimate tone. The coil winds are also microshielded with a thin copper film, this ensures that the coil is totally encapsulated keeping the electrical noise out of the pickup.
 
The AlNiCo 5 rod magnets  is the engine to this pickup. The magnet is gaussed (charged) in a particular way to ensure that optimal tone and dynamics are produced within the coil. 
 
The hook up wires are a studio grade, Van Damme®, Oxygen Free Copper (OFC) shielded 2x wire conducter giving you best noise rejection and wiring options.
 
Please note, Electrical/Electronic noise surrounds us, not only are pickups susceptable to this noise, your wiring harness is too. Therefore, pickup sets will come complete with a Switchcraft mono jack socket and studio grade Van Damme®, Oxygen Free Copper (OFC) shielded 2x wire conducter to reject further unwanted signals if required.
 
These pickups are described as '50mm/Neck', 52mm/Middle' and '52mm/Bridge'. This is the spacing of the pole pieces from the 1st sting to the 6th string.