T-TYPE SET - CARBON FIBRE & STAINLESS STEEL
 
For Telecaster® type guitars
 
These single coil pickups have been designed from the ground up. Every step of its design ensures the greatest tone whilst offering  minimal electrical noise.
 
The bobbin of the bridge pickup is made using a combination Stainless Steel on the bottom part of the bobbin with a Carbon Fibre top. The bridge pickup is completed by adding the traditional grounding plate to the underside. The Neck pickup bobbin is 100% stainless steel and is coverless!
 
At a glance, this telecaster pickup set offers a traditional look, but look a little closer and you will quickly notice the obvious difference. With the black of the carbon fibre on show in the bridge pickup and the polished stainless steel shining in the neck pickup you could easily be mistaken for a standard set of pickups.
 
Each pickup comes with its mounting screws and springs for height adjustment.
 
The coils on these pickups are 100% hand scatter wound with 42 gauge copper wire for ultimate tone. The coil winds are also microshielded with a thin copper film, this ensures that the coil is totally encapsulated keeping the electrical noise out of the pickup.
 
The AlNiCo 5 rod magnets  is the engine to these pickups. The magnet is gaussed (charged) in a particular way to ensure that optimal tone and dynamics are produced within the coil. 
 
The hook up wires are a studio grade, Van Damme®, Oxygen Free Copper (OFC) shielded 2x wire conducter giving you best noise rejection and wiring options.
 
Please note, Electrical/Electronic noise surrounds us, not only are pickups susceptable to this noise, your wiring harness is too. Therefore, pickup sets will come complete with a Switchcraft mono jack socket and studio grade Van Damme®, Oxygen Free Copper (OFC) shielded 2x wire conducter to reject further unwanted signals if required.